Introduction
DOMITE
(700 BHN) products are made in Australia by the CQMS
Group. This unique product was originally created for
the Australian mining and quarrying industries by Mason
& Cox Foundries in 1967. Today the DOMITE
range of products is manufactured and distributed to
worldwide markets from facilities in Adelaide, South
Australia. DOMITE
products are marketed across the globe through a network
of dedicated dealers and CQMS representatives.
Being the original inventors of the Australian made
DOMITE
product, over the years CQMS has
developed a range of over 3,000 different DOMITE
shapes and sizes for a wide variety of applications.
As well as DOMITE, CQMS manufactures and supplies other
wear resistant composite products known as REMAR (a
reinforced white iron), and RUBBADEX (a rubber/steel
backed noise reduction wear plate). All these
products are designed to withstand high impact and
provide maximum wear resistance in the mining,
earthmoving, construction, dredging, crushing, sugar and
recycling industries.
For any wear solution CQMS is able to offer its
customers, full design, layout and assembly of all
DOMITE
products. Designs can incorporate other wear products
such as ceramics, wear resistant rubbers and polymers,
sintered Tungsten carbide enhanced products, QT or AR
plate, clad or overlay plate and wear resistant castings
and alloys.
All this is available from WEARCO as a "one stop shop"
for all your abrasion resistant product needs.
IN THIS SECTION
DOMITE
Chocky Bars
This product has long been the most popular wear item in the
DOMITE range.
The DOMITE (700 BHN) Chocky Bar was developed by
CQMS many years ago as an alternative to
expensive, labour intensive, hard facing welding methods.
Applications for DOMITE Chocky Bars are wide and
varied, ranging from specific wear protection on buckets for
loaders, excavators and draglines machines, or for weld-on
hammer tips for the re-cycling industry, or chute linings
and rock box edges.
Chocky bars are so easy to use! No storage problems or
excessive cutting into strips required when compared to
sheets of wear plates. There is also no pre-heating or post
heating required when welding DOMITE bars into
place.
DOMITE
Chocky Bars are easy to cut and form onto inside and outside contoured surfaces. Users can
calculate their own lay-outs and patterns depending on the
area and shape of the parts that they want to protect. The
notches in the Chocky Bar casting and/or backing plate
assist in cutting them to size or bending them to shape to
suit the application.
Talk to us about the use of DOMITE Chocky Bars
for your particular application. Chances are someone is
already using it successfully for that same application
somewhere around the world.
Top of Page
Î
DOMITE
(700 BHN) Wear Buttons and Donuts are the perfect
alternative to expensive, labour intensive hard facing or
the need to cut wear strips from full sheets of wear plate.
Available in diameters from 60mm up to 150mm.
Develop your own layout and pattern to suit your particular
wear protection solution.
Talk to us about how to effectively use these parts for
applications ranging from specific wear protection on
buckets and GET for loaders, excavators and draglines, to
conveyor transfer points and chutes.
DOMITE
Wear Buttons are easy to use and install with no pre or post
heating.
Top of Page
Î
WEARCO has a huge selection of wear plates
from which to choose!
DOMITE
(700 BHN) Wear Plates are available in thicknesses ranging
from 20mm to 75mm and in sizes up to 500mm square.
Suitable for use in chutes, hoppers, bins, impact walls,
screen plates, and general wear protection in many proven
Fixed Plant applications.
To cover large areas with DOMITE requires a
planned layout using liners of various shapes and sizes
which are available from CQMS’s extensive range. With your
input, CQMS can do all your design work for liner layouts
and installations.
DOMITE
Wear Plates are easy to use and install. They can be
welded or can be stud bolted to suit your fitment
needs. Talk to your CQMS representative about the range of
stud bolt options available and how we can design,
manufacture and supply your specific liner needs.
DOMITE
Wear Plates offer superior wear life when compared to
conventional alloys used such as manganese steel, ni-hard
alloys, chrome-moly pearlitic steels, Q&T bars and clad
overlay strips. DOMITE Wear Plates provide the
ability to change out worn sections only, rather than
replacing whole sheets or plates.
DOMITE
Wear Plates and other DOMITE products present a
very cost effective method of extending wear life of the
machinery you want protected.
Top of Page
Î
DOMITE
(700 BHN) Wear Bars and Blocks are available in thicknesses
ranging from 25mm to 100mm, widths from 25mm to 300mm wide
and in varying lengths. Let us know what size or dimensions
that you want, if we don't have it, we will make it for
you.
Suitable for use in chutes, hoppers, bins, transfer points,
rock box edges and many other proven Fixed Plant
applications.
DOMITE
Wear Bars and Blocks are easy to use and install using the
DOMITE® Welding Instruction.
DOMITE
Wear Bars and Blocks can be stud bolted to suit your fitment
needs. Talk to us about the range of Studded wear bars we
can offer.
DOMITE
Wear Bars and Blocks offer superior wear life when compared
to conventional alloys used such as manganese steel, ni-hard
alloys, chrome-moly pearlitic steels, Q&T bars and clad
overlay strips.
DOMITE
Wear Bars and Blocks give the ability to be able to change
out worn sections only, rather than replacing whole sheets
or plates.
DOMITE
Wear Bars and Blocks offer a very cost effective method of
extending wear life of the machinery you want protected.
